VY / VZ Holden Boot Garnish / Number Plate Holder replacement clips

VY / VZ Holden Boot Garnish / Number Plate Holder replacement clips

SUITS: Holden VY / VZ Models

This WALMAT design is the same size and mounting as an original clip, made from ABS and made stronger and stiffer than Holden.

This design is ready to be mounted to your existing boot garnish / Number plate surround with a couple of easy to follow steps.

Step 1: Prepare the surface to be mounted to - I did this with some 240 grit Wet and dry sandpaper and took it down just far enough so that I could still see the outline of the old clips making it easy to see where to remount these new clips.

Step 2: Make sure you have the right clip for the right side.  They are marker with a P for passenger side and D for drivers side and the skinny part points to the top.  *Remember which way the garnish faces when off the vehicle.

Step 3: Find an appropriate glue - basic superglue may not work.  I use a Selley's plastic glue (available from Bunnings) or you could also use a 2 part epoxy for an ultimate grip.  Apply it liberally to the area and wait for the glue to dry and reassemble the car.

We are offering a 24-month warranty on this product.

It is designed, manufactured here in Australia using ONLY Australian made products - We support Australian businesses too!

We stand behind all our products and designs - if you are not 100% happy, return the product for a full refund less the cost of shipping - We are only happy if you are!

*Please note - The metal bolts pictured are not included - only the plastic mounts are included.